Mods, retrofits, service procedures:

• Adaptive Brake Lights activation

  Flashing brake lights and hazard lights when emergency braking.

  Module: 46 (Central convenience)
  Coding → Long Coding → Byte: 08 → Bit: 0
  New value: enable

  Module: 46 (Central convenience)
  Coding → Long Coding → Byte: 08 → Bit: 1
  New value: enable

  Procedure ID: 4

• Central Lock Beep when Unlocking activation

  Enables car unlocking sound confirmation.

  Module: 46 (Central convenience)
  Adaptation → Channel: 63
  Change value: +4

  Procedure ID: 14

• Comfort Turn Signals Count adjustment

  Changes how many times should the indicator blink when using comfort indicators.

  Module: 09 (Central Electronics)
  Adaptation → Channel: 31
  New value: newValue

  New value within range from 1 to 5.

  Procedure ID: 89

• Cornering Lights via Fog Lights activation

  Front fog lights will be used as cornering lights.

  Module: 09 (Central Electronics)
  Coding → Long Coding → Byte: 04 → Bit: 0
  New value: enable

  Procedure ID: 16

• DRLs Control with MMI activation

  Control Daytime Running Lights from navigation screen.

  Module: 09 (Central Electronics)
  Coding → Long Coding → Byte: 03 → Bit: 5
  New value: enable

  Procedure ID: 7

• DRLs with Rear Lights On activation

  Turn on tail lights when Daytime Running Lights are on.

  Module: 09 (Central Electronics)
  Coding → Long Coding → Byte: 02 → Bit: 7
  New value: enable

  Procedure ID: 9

• Europe Parking Lights activation

  Turn on parking lights on one side of the car with turn signal.

  Module: 09 (Central Electronics)
  Coding → Long Coding → Byte: 09 → Bit: 0
  New value: enable

  Procedure ID: 8

• Instrument Cluster "Lights are on" Warning deactivation

  Disables "Lights are on" message when drivers door is opened.

  Module: 09 (Central Electronics)
  Coding → Long Coding → Byte: 05 → Bit: 3
  New value: disable

  Procedure ID: 6

• Instrument Cluster DIS activation

  Enables instrument cluster Driver Information System to access trip computer, media information, navigation guidance, phone control and more.

  Module: 17 (Instruments Cluster)
  Coding → Long Coding → Byte: 01 → Bit: 2
  New value: enable

  Procedure ID: 47

• Instrument Cluster Efficiency Program activation

  Enables efficiency tips on the instruments cluster.

  Module: 17 (Instruments Cluster)
  Adaptation → Channel: 77
  New value: 255

  Procedure ID: 13

• Instrument Cluster Keyless Warning deactivation

  Disables keyless warning from instruments cluster.

  Module: 46 (Central convenience)
  Coding → Long Coding → Byte: 09 → Bit: 7
  New value: disable

  Procedure ID: 5

• Instrument Cluster Lap Timer activation

  Extra trip computer menu with lap timer (optional boost gauge, oil temperature, shift light).

  Module: 17 (Instruments Cluster)
  Coding → Long Coding → Byte: 01 → Bit: 3
  New value: enable

  Procedure ID: 1

• Instrument Cluster Needle Sweep activation (coding method)

  Gauge test when turning the ignition on.

  Watch Instrument Cluster Needle Sweep activation (coding method) tutorial on YouTube.

  Module: 17 (Instruments Cluster)
  Coding → Long Coding → Byte: 01 → Bit: 0
  New value: enable

  Procedure ID: 2

• Instrument Cluster Seat Belt Reminder deactivation

  Disables seat belt warning indicator and warning sound.

  Module: 17 (Instruments Cluster)
  Coding → Long Coding → Byte: 00 → Bit: 2-4
  New value: disable

  Seat belt is a safety device designed to secure the occupant of a vehicle against harmful movement that may result during a collision or a sudden stop. Please always wear seat belt.

  Procedure ID: 11

• Rear Wiper Automatic in Reverse activation

  Enables rear wiper when reverse gear is engaged and front wipers are on.

  Module: 09 (Central Electronics)
  Security Access → Code: 20113
  Adaptation → Channel: 19
  New value: 1

  Procedure ID: 99

• Remote Windows and Sunroof Control activation

  Long-press remote buttons to open and close windows and sunroof.

  Module: 46 (Central convenience)
  Coding → Long Coding → Byte: 02 → Bit: 2
  New value: enable

  Procedure ID: 12

• Seat Memory via Key Detection activation

  Enables seat position key memory in cars without memory seats.

  Module: 36 (Drivers seat memory)
  Coding → Long Coding → Byte: 02 → Bit: 0
  New value: enable

  Procedure ID: 15

• Side Mirror Tilt on Reverse activation

  Passengers mirror will tilt down when in reverse and control switch set to passengers side.

  Module: 52 (Passenger door electronics)
  Coding → Long Coding → Byte: 04 → Bit: 4
  New value: enable

  Module: 52 (Passenger door electronics)
  Coding → Long Coding → Byte: 04 → Bit: 2
  New value: enable

  Procedure ID: 10

• Unlock MMI 2G Hidden Menu

  Hidden menu gives you access to developer-level functions, settings and statistics.

  Do not change any settings in Hidden Menu unless you know what you are doing. Accessing some to developer-level functions can make your system inoperable. Use at your own risk.

  Module: 07 (Control head)
  Adaptation → Channel: 8
  New value: 1

  Reboot infotainment unit by pressing at the same time buttons RETURN/BACK + Control Knob + Upper Right function key.

  To enter Hidden Menu press and hold buttons: CAR + SETUP/MENU.

  Check all mods available for this multimedia system. Click here.

  Procedure ID: 48

• Unlock MMI 3G/3G+ Hidden Menu

  Hidden menu gives you access to developer-level functions, settings and statistics.

  Do not change any settings in Hidden Menu unless you know what you are doing. Accessing some to developer-level functions can make your system inoperable. Use at your own risk.

  Module: 5F (Information electronics)
  Adaptation → Channel: 6
  New value: 1

  Reboot infotainment unit by pressing at the same time buttons RETURN/BACK + Control Knob + Upper Right function key.

  To enter Hidden Menu press and hold buttons: CAR + SETUP/MENU.

  Check all mods available for MMI 3G. Click here.

  Procedure ID: 98

• Windscreen Wipers Tear Wipe activation

  Additional wiper move after using windscreen washer.

  Module: 09 (Central Electronics)
  Coding → Long Coding → Byte: 01 → Bit: 3
  New value: enable

  Procedure ID: 3