Audi Q3 SQ3 RSQ3 8U mods
Coding mods, retrofit guides, service & repair procedures.
Selected with specially for your Audi Q3 SQ3 RSQ3 8U.
Enable hidden options, adjust factory features, tweak your ride, fix fault codes.
Make your car fit your individual needs.
Mods, retrofits, service procedures:
- Central Lock Acoustic Confirmation activation
Enables sound confirmation when locking and unlocking car, as well as option to control this feature from the multimedia system menu.
Watch Central Lock Acoustic Confirmation activation tutorial on YouTube.
Module: 09 (Central Electronics)
Coding → Long Coding → Byte: 05 → Bit: 1
New value: enableModule: 09 (Central Electronics)
Coding → Long Coding → Byte: 05 → Bit: 4
New value: enableModule: 09 (Central Electronics)
Coding → Long Coding → Byte: 05 → Bit: 2
New value: disableProcedure ID: 186
- Cornering Lights via Fog Lights activation
Front fog lights will be used as cornering lights.
Watch Cornering Lights via Fog Lights activation tutorial on YouTube.
Module: 09 (Central Electronics)
Coding → Long Coding → Byte: 14 → Bit: 7
New value: enableProcedure ID: 90
- DRLs Control with MMI activation
Control Daytime Running Lights from navigation screen.
Watch DRLs Control with MMI activation tutorial on YouTube.
Module: 09 (Central Electronics)
Coding → Long Coding → Byte: 15 → Bit: 7
New value: activeProcedure ID: 180
- DRLs Off with Handbrake On activation
Daytime running lights will automatically turn off when parking brake is engaged.
Module: 09 (Central Electronics)
Coding → Long Coding → Byte: 11 → Bit: 0
New value: enableProcedure ID: 185
- DRLs with Rear Lights On activation
Turn on tail lights when Daytime Running Lights are on (so called Scandinavian DRLs).
Module: 09 (Central Electronics)
Coding → Long Coding → Byte: 18 → Bit: 0
New value: enableProcedure ID: 184
- Emergency Brake Lights activation
Flashing brake lights when emergency braking and hazard lights when emergency stopping.
Module: 09 (Central Electronics)
Coding → Long Coding → Byte: 16 → Bit: 1
New value: enableModule: 09 (Central Electronics)
Coding → Long Coding → Byte: 16 → Bit: 2
New value: enableProcedure ID: 88
- Fog Lights with Reverse Gear activation
Front fog lights will turn on when reverse gear is selected for better visibility around the car.
Module: 09 (Central Electronics)
Coding → Long Coding → Byte: 26 → Bit: 6
New value: enabledProcedure ID: 189
- Instrument Cluster Needle Sweep activation (coding method)
Gauge test when turning the ignition on.
Watch Instrument Cluster Needle Sweep activation (coding method) tutorial on YouTube.
Module: 17 (Instruments Cluster)
Adaptation → Channel: Staging
New value: activeProcedure ID: 179
- Instrument Cluster Seat Belt Reminder deactivation
Disables seat belt warning indicator and warning sound.
Module: 17 (Instruments Cluster)
Adaptation → Channel: Seat belt warning
New value: disabledSeat belt is a safety device designed to secure the occupant of a vehicle against harmful movement that may result during a collision or a sudden stop. Please always wear seat belt.
Procedure ID: 182
- Rest recommendation activation
If the system determines that the driver’s attentiveness is declining, then it will recommend some rest by illuminating an indicator in the driver information system and sounding an acoustic signal.
Module: 19 (CAN getaway)
Adaptation → Channel: 5
New value: 1Module: 19 (CAN getaway)
Adaptation → Channel: 49
New value: 1Module: 5F (Information electronics)
Coding → Long Coding → Byte: 08 → Bit: 3
New value: activeProcedure ID: 187
- START/STOP System deactivation
START/STOP system will no longer work and there will be no warning on the instrument cluster.
Watch START/STOP System deactivation tutorial on YouTube.
Module: 09 (Central Electronics)
Coding → Long Coding → Byte: 26 → Bit: 0
New value: disableModule: 17 (Instruments Cluster)
Adaptation → Channel: Control lamp for start-stop operation
New value: inactiveProcedure ID: 181
- Side Mirror Tilt on Reverse activation
Passengers mirror will tilt down when in reverse and control switch set to passengers side.
Module: 09 (Central Electronics)
Coding → Long Coding → Byte: 04 → Bit: 3
New value: enableModule: 52 (Passenger door electronics)
Coding → Long Coding → Byte: 04 → Bit: 2
New value: enableModule: 52 (Passenger door electronics)
Coding → Long Coding → Byte: 04 → Bit: 3
New value: enableProcedure ID: 188
- Side Mirrors Fold with Central Lock activation
Enable mirrors folding when locking the car by remote control.
Watch Side Mirrors Fold with Central Lock activation tutorial on YouTube.
Module: 42 (Driver door electronics)
Coding → Long Coding → Byte: 04 → Bit: 6
New value: enableModule: 52 (Passenger door electronics)
Coding → Long Coding → Byte: 04 → Bit: 6
New value: enableProcedure ID: 183