Mods, retrofits, service procedures:

• Central Lock Honk when Locking and Unlocking activation

  Enables sound confirmation when locking and unlocking car, as well as option to control this feature from the multimedia system menu.

  Module: 09 (Central Electronics)
  Security Access → Code: 31347

  Module: 09 (Central Electronics)
  Adaptation → Channel: Acknowledgement signals - Akustische Rueckmeldung Entriegeln
  New value: active

  Module: 09 (Central Electronics)
  Adaptation → Channel: Acknowledgement signals - Akustische Rueckmeldung Verriegeln
  New value: active

  Module: 09 (Central Electronics)
  Adaptation → Channel: Acknowledgement signals - Akustische Rueckmeldung Signalhorn
  New value: active

  Module: 09 (Central Electronics)
  Adaptation → Channel: Acknowledgement signals - Menuesteuerung akustische Rueckmeldung
  New value: active

  Module: 09 (Central Electronics)
  Adaptation → Channel: Anti-thieft device - Akustischer Alarm Signalhorn
  New value: active

  Procedure ID: 115

• Cornering Lights via Fog Lights activation

  Front fog lights will be used as cornering lights.

  Module: 09 (Central Electronics)
  Security Access → Code: 31347
  Adaptation → Channel: Leuchte12NL LB40-Light_Function_B_12
  New value: Abbiegelicht links

  Module: 09 (Central Electronics)
  Security Access → Code: 31347
  Adaptation → Channel: Leuchte13NL RB3-Light_Function_B_13
  New value: Abbiegelicht rechts

  Procedure ID: 108

• DRLs Off with Handbrake On activation

  Daytime running lights will automatically turn off when parking brake is engaged.

  Watch DRLs Off with Handbrake On activation tutorial on YouTube.

  Module: 09 (Central Electronics)
  Security Access → Code: 31347

  Module: 09 (Central Electronics)
  Adaptation → Channel: Daytime running lights-Tagfahrlicht Dauerfahrlicht bei Handbremse abschalten
  New value: active

  Procedure ID: 109

• Emergency Brake Lights activation

  Flashing brake lights when emergency braking and hazard lights when emergency stopping.

  Module: 09 (Central Electronics)
  Coding → Long Coding → Byte: 16 → Bit: 1
  New value: enable

  Module: 09 (Central Electronics)
  Coding → Long Coding → Byte: 16 → Bit: 2
  New value: enable

  Procedure ID: 88

• Hild Hold Control activation

  Enebles ABS pump to hold brakes for few more seconds when brake pedal is released.

  Module: 03 (ABS brakes)
  Coding → Long Coding → Byte: 16 → Bit: 0
  New value: enable

  Module: 03 (ABS brakes)
  Adaptation → Channel: Hill_Start_Assist
  New value: Normal

  Procedure ID: 102

• Instrument Cluster Key Warning deactivation

  Disables warning message that reminds to turn the ignition off and take the key out from the ignition.

  Module: 17 (Instruments Cluster)
  Coding → Long Coding → Byte: 01 → Bit: 4
  New value: disable

  Module: 17 (Instruments Cluster)
  Adaptation → Channel: Ignition active message actuator
  New value: no display

  Procedure ID: 106

• Instrument Cluster Lap Timer activation

  Extra trip computer menu with lap timer (optional boost gauge, oil temperature, shift light).

  Module: 17 (Instruments Cluster)
  Coding → Long Coding → Byte: 01 → Bit: 3
  New value: enable

  Procedure ID: 1

• Instrument Cluster Needle Sweep activation (coding method)

  Gauge test when turning the ignition on.

  Watch Instrument Cluster Needle Sweep activation (coding method) tutorial on YouTube.

  Module: 17 (Instruments Cluster)
  Coding → Long Coding → Byte: 01 → Bit: 0
  New value: enable

  Procedure ID: 2

• Instrument Cluster Rear Fog Light Warning activation

  Enables warning message that will remind you about rear fog lights turned on when reachnig set speed.

  Watch Instrument Cluster Rear Fog Light Warning activation tutorial on YouTube.

  Module: 09 (Central Electronics)
  Security Access → Code: 31347

  Module: 09 (Central Electronics)
  Adaptation → Channel: Driving light and parking light - Nebelschlusslicht Warngeschwindigkeit
  New value: 51km/h

  Procedure ID: 110

• Instrument Cluster Refuel Amount activation

  Shows estimated refuel amount on instrument cluster menu.

  Watch Instrument Cluster Refuel Amount activation tutorial on YouTube.

  Module: 17 (Instruments Cluster)
  Coding → Long Coding → Byte: 10 → Bit: 4
  New value: enable

  Procedure ID: 27

• Instrument Cluster Seat Belt Reminder deactivation

  Disables seat belt warning indicator and warning sound.

  Module: 17 (Instruments Cluster)
  Adaptation → Channel: Disable seat belt warning
  New value: Yes

  Seat belt is a safety device designed to secure the occupant of a vehicle against harmful movement that may result during a collision or a sudden stop. Please always wear seat belt.

  Procedure ID: 101

• LED License Plate adjustment

  Disables cold checking for bulbs installed above license plate and sets the control unit to LED mode.

  Use this if replacing regular bulbs with LEDs without CAN-BUS resistor.

  Module: 09 (Central Electronics)
  Security Access → Code: 31347
  Adaptation → Channel: Leuchte25KZL HA60-Type_Of_Load_25
  New value: allgemeine LED mit Open Load Diagnose

  Procedure ID: 114

• Windscreen Wipers Dynamic Speed activation

  Enables feature that will slow down windscreen wipers if car stops.

  Module: 09 (Central Electronics)
  Coding → Long Coding → Byte: 14 → Bit: 7
  New value: enable

  Procedure ID: 107

• Windscreen Wipers Power Management adjustment

  Disables power shutdown for the wipers motor so wipers can continue to move with the ignition off.

  Module: 09 (Central Electronics)
  Security Access → Code: 31347
  Adaptation → Channel: Windshield wiper-Wischer stop bei KL15 aus
  New value: not active

  Procedure ID: 113

• Windscreen Wipers Service Position Menu activation

  Enables option to set wipers into service position in the multimedia system menu.

  Module: 09 (Central Electronics)
  Adaptation → Channel: IDE01268-ENG126573 -Frontwischer_Serviceposition
  New value: active

  Module: 09 (Central Electronics)
  Adaptation → Channel: IDE01268-ENG116615- Menuesteuerung Frontwischer
  New value: active

  Procedure ID: 112

• Windscreen Wipers Tear Wipe activation

  Additional wiper move after using windscreen washer.

  Module: 09 (Central Electronics)
  Security Access → Code: 31347

  Module: 09 (Central Electronics)
  Adaptation → Channel: Windshield wiper-Traenenwischen Front Status
  New value: active

  Procedure ID: 111