Mods, retrofits, service procedures:

• Climatronic Fan Speed Display on with Auto Mode activation

  Shows current blower fan speed when Climatronic auto mode is enabled.

  Module: 08 (Automatic heat, ventilation, air condition)
  Coding → Long Coding → Byte: 11 → Bit: 6
  New value: enabled

  Procedure ID: 224

• Instrument Cluster Lap Timer activation

  Extra trip computer menu with lap timer and oil temperature.

  Watch Instrument Cluster Lap Timer activation tutorial on YouTube.

  Module: 17 (Instruments Cluster)
  Coding → Long Coding → Byte: 01 → Bit: 3
  New value: enable

  Procedure ID: 221

• Instrument Cluster Needle Sweep activation (coding method)

  Gauge test when turning the ignition on.

  Module: 17 (Instruments Cluster)
  Coding → Long Coding → Byte: 01 → Bit: 0
  New value: enable

  Procedure ID: 220

• Instrument Cluster Oil Temperature Display activation

  Enables engine oil temperature menu on instrument cluster trip computer menu.

  Module: 17 (Instruments Cluster)
  Coding → Long Coding → Byte: 10 → Bit: 1
  New value: enable

  Procedure ID: 222

• Remote with Ignition On activation

  Enables the remote buttons to work with the ignition turned on. You can close the vehicle via the remote with the engine running.

  Module: 09 (Central Electronics)
  Security Access → Code: 31347

  Module: 09 (Central Electronics)
  Adaptation → Channel: Access control - Funk bei Klemm 15 ein
  New value: active

  Procedure ID: 223