Mods, retrofits, service procedures:

• Central Lock Beep when Locking activation

  Enables car locking sound confirmation.

  Module: 46 (Central convenience)
  Coding → Long Coding → Byte: 01 → Bit: 2
  New value: enable

  Procedure ID: 45

• Central Lock Beep when Unlocking activation

  Enables car unlocking sound confirmation.

  Module: 46 (Central convenience)
  Adaptation → Channel: 63
  Change value: +4

  Procedure ID: 14

• Close Trunk from Driver Door Button activation

  Enables trunk closing with button on the drivers door.

  Module: 46 (Central convenience)
  Coding → Long Coding → Byte: 02 → Bit: 2
  New value: enable

  Module: 6D (Trunk electronics)
  Security Access → Code: 12345
  Adaptation → Channel: Activation using rear lid remote unlocking switch - Tap function for closing
  New value: active

  Procedure ID: 44

• Cornering Lights via Fog Lights activation

  Front fog lights will be used as cornering lights.

  Module: 09 (Central Electronics)
  Coding → Long Coding → Byte: 04 → Bit: 0
  New value: enable

  Procedure ID: 16

• DRLs with Rear Lights On activation

  Turn on tail lights when Daytime Running Lights are on.

  Module: 09 (Central Electronics)
  Coding → Long Coding → Byte: 02 → Bit: 7
  New value: enable

  Procedure ID: 9

• Engine STOP when Opening Drivers Door disable

  Opening drivers door will no longer automatically shut down the engine.

  Module: 46 (Central convenience)
  Coding → Long Coding → Byte: 15 → Bit: 3
  New value: enable

  Procedure ID: 154

• Instrument Cluster DIS activation

  Enables instrument cluster Driver Information System to access trip computer, media information, navigation guidance, phone control and more.

  Module: 17 (Instruments Cluster)
  Coding → Long Coding → Byte: 01 → Bit: 2
  New value: enable

  Procedure ID: 47

• Instrument Cluster Lap Timer activation

  Extra trip computer menu with lap timer (optional boost gauge, oil temperature, shift light).

  Module: 17 (Instruments Cluster)
  Coding → Long Coding → Byte: 01 → Bit: 3
  New value: enable

  Procedure ID: 1

• Instrument Cluster Needle Sweep activation (coding method)

  Gauge test when turning the ignition on.

  Watch Instrument Cluster Needle Sweep activation (coding method) tutorial on YouTube.

  Module: 17 (Instruments Cluster)
  Coding → Long Coding → Byte: 01 → Bit: 0
  New value: enable

  Procedure ID: 2

• Instrument Cluster Seat Belt Reminder deactivation

  Disables seat belt warning indicator and warning sound.

  Module: 17 (Instruments Cluster)
  Coding → Long Coding → Byte: 00 → Bit: 4
  New value: disable

  Seat belt is a safety device designed to secure the occupant of a vehicle against harmful movement that may result during a collision or a sudden stop. Please always wear seat belt.

  Procedure ID: 42

• Parktronic Switch Off Speed adjustment

  Set at what speed parking assist (sensors and cameras) will switch off.

  Module: 10 (Parking/steering assist)
  Adaptation → Channel: 23
  New value: 20

  Procedure ID: 46

• Remote Close Trunk activation

  Enables trunk closing with rear lid button on the remote control.

  Module: 46 (Central convenience)
  Coding → Long Coding → Byte: 02 → Bit: 2
  New value: enable

  Module: 6D (Trunk electronics)
  Security Access → Code: 12345
  Adaptation → Channel: Activation using rear lid opening button in remote key - Touch function for closing
  New value: active

  Procedure ID: 43

• Side Mirror Tilt on Reverse activation

  Passengers mirror will tilt down when in reverse and control switch set to passengers side.

  Module: 52 (Passenger door electronics)
  Coding → Long Coding → Byte: 04 → Bit: 2
  New value: enable

  Procedure ID: 41